| |
 |
Lacquer and Paint Testing Machine
EN ISO
This simple to operate Lacquer and Paint Testing Machine is used for rapid and accurate measurement of the elongation and adhesion properties of protective paints and other coatings of all types using the ERICHSEN CUPPING TEST.
The cupping speed is infinitely variable from 2 mm/min to 60
mm/min. On Model 202 EM the sheet metal specimen is clamped automatically. Due to the laterally opening of the cylinder also larger sheet metal panels can be accommodated in the test head.
At option:
Microscopes for observing the test
procedure or a Camera module
VIDEOMASTER USB. Electric crack indicating device for insulating layers.
|
|
Thickness Gauge
IN, EN ISO
In accordance with the standardized wedge cut method in which the specimen is cut at a defined angle. It has
been developed to extend the range of the application of the PAINT BORER 518 S, especially targeting sensitive
drillings, especially into rigid/brittle materials. It is possible that, already at minor eccentric irregular running of
the drill used or of its centre axle, such materials can be subject to breaking off of the cutting edges including
chipping off. To minimize these limitations the PAINTEXPLORER 548, a convenient table top unit, is equipped with an improved rotating/sliding high precision axle-bearing device. It is a laboratory equipment, either be
held in hand or used in connectionwith the measuring stand that is included in the scope of supply. |
|
Coating Thickness Gauge
DIN, ISO, ASTM
The small, universally applicable thickness gauge, used for nondestructive, fast and precise coating thickness measurements. The LAYERCHECK 700 FN provides the magnetic induction principle as well as the eddy-current method. Due to this, it is available in two versions:
LAYERCHECK 700 F for all non-magnetic coatings on steel (0-3000 μm). LAYERCHECK 700 FN for all non-magnetic coatings on steel (0- 2000 μm) and all insulating coatings
on non-ferrous metals. Both versions are equipped with statistics function, illuminated display, RS 232 Interface, Standard-/ 1-Point-/ and 2-Point-Calibration. Software as
free download. At option: Data printer, calibration certificate. |
|
Cylindrical Mandrel Bending Tester
EN, EN ISO, ASTM
Lever-type instrument for testing the flexibility and the adhesive properties of coatings when these are
subjected to bending stresses. With 14 easy changeable mandrels (diameter 2 - 32 mm). Testing with the
cylindrical mandrel bending tester determines the greatest cylinder diameter at which a coating will show cracking or flaking subsequen to bending. Model 266 S allows the
testing of samples up to a width of
100 mm. |
|
Multi-Cross Cutter with free turnable cutting head
EN, EN ISO, ASTM
The axle supports the uniform distribution of pressure over the total area of the cutting head, and thus the
results are less dependent of the user. Herewith many users have made the experience, that the application
is considerably more fatiguefree and more comfortable! However, to comply with the special liking of each user for the performance preferred, the versions IX, X and XI are
additionally equipped with a locking
ring.
|
|
Single Edge Cutting Device
EN, EN ISO, ASTM
Due to several requests a new and versatile applicable single edge cutting device is now available. With
Model 295/XIV free cuts on curved surfaces are now possible. It consists of a special hard-coated test tip
mounted into an adapter block with holder. A helpful and for many of such applications recommandable flexible steel ruler is already included.
|
|
Folding ruler for Model 295/III
With 10 swivel-mounted folding rulers of 1 mm thickness each. |
|
Folding ruler for Model 295/XII
With 10 swivel-mounted folding rulers 1 mm/1.5 mm thickness each (1.5 mm = acc. to Daimler-Benz). |
|
Folding ruler for Model 295/XIII
With 5 swivel-mounted folding rulers 1 mm/2 mm/3 mm thickness each. |
|
Gloss Meter
DIN, EN ISO, ASTM
The PICOGLOSS 560 MC S is, as well as the PICOGLOSS 560 MC, one of the smallest Glossmeters ever. The main
difference to the 560 MC is the remarkable small aperture of the 560 MC S (round, with a diameter of
3 mm), which has been developed due to numerous enquiries from potential users (up to now, mainly
from the Automotive matter). It enables now the gloss measurement even on small parts.
|
|
Color and Gloss Unit
DIN, ISO, ASTM
The overall appearance of a product is influenced by color and gloss. A sample of the same color but higher gloss level is visually perceived darker and more saturated than a low
gloss sample. In order to get a uniform appearance, both attributes need to be controlled. The Spectrometers
of the very most other suppliers are only able to measure the color value. In comparison with this, the SPEKTROMASTER 565 is able to measure color and gloss both simultaneously!
Thus, the cause of a mismatch can be clearly defined in any
situation. Two different versions are available:
- SPEKTROMASTER 565-45,
for simultaneous measurement of color (geometry 45/0) and gloss (geometry 60°).
- SPEKTROMASTER 565-D,
for simultaneous measurement of
color (geometry 8/d) - (Ullbricht’sche
Kugel) - and gloss (geometry 60°).
|
|
SCROLLRULER
The SCROLLRULER 295/XV is a universal ruler for cross hatch cuts, where the desired cutting distances (6 x 1
mm, 6 x 2 mm, 6 x 3 mm, 11 x 1 mm, 11 x 1.5 mm) can be adjusted very easily as well as comfortable, simply
by turning a thumb wheel.
|
|
SAE Stone Hammer Blow Testing Instrument
ASTM, SAE, GM, VOLVO
The MULTI GRIT TESTER 508 SAE features a good repeatability and reproducibility of the test results.
It is equipped with an adjustable impact angle. The bombardment of the test panels is carried out with
determinate grit (according to ASTM D 3170). Dependent of the specifications of further standards other shot materials
can be used. The shot is entered automatically using
an adjustable vibratory feed. On a multifunctional
display the working pressure, the duration of the test, the setting of the vibratory feed and the number of tests conducted (total/ temporary) can be read off alternatively. |
|
Scratch Hardness Tester
EN ISO
To establish the ability of a surfaces to resist damage by scratching, also for several other tests: Scribe/Scratch
tests, To and fro-cycle abrasion tests, Crockmeter tests, MEK tests, tests determining the resistance against
solvents in general or wipe test, respectively. The required scratching force in the range of 0.5 to 20 N is set
by moving the weight along the reciprocating beam, making use of a setting scale. When testing insulating coatings on conducting substrates, an electric recognition of the
through-scratching offers an additional security for setting the scratching force. There are three fixed as
well as one freely programmable test speeds available. A wide program of available test tools is tailored to cover a lot of testing requirements.
|
|
Gloss Meter
DIN, EN ISO, ASTM
A compact portable battery-operated gloss meter in SMD-Technics with high accuracy and three measuring geometries of 20°, 60° and 85°. In case of e. g. high gloss metallic or chromium-plated surfaces the instrument switches over automatically to mirror gloss easurement. The integrated USB (Mini) as well as Bluetooth® interfaces enable the data transmission to a PC. Additionally, also the power supply can be provided through the integrated
USB (Mini) interface, by a PC. A Data Analysis Software is already part of the delivery specification. |
|
Colour Comparison Cabinet
EN ISO, ASTM
The Standard Light Cabinet MATCHMASTER 425 MC II is a colour comparison instrument with five different light sources (D65, TL84, A, TL83, UV) for perfect assessment
and comparison of colour under various light types. A
light diffuser provides a uniform distribution of light. Upon request light types can be exchanged, e.g. CWF (cool white fluorescent). A Calibration Certificate (light quality) is included in the scope of supply. An electronic light automatism enables a programmable automatic change of light sources in connection with adjustable times of illumination. The user can programme a sequence of the individual light types (up to 10 changes in any desired order. |
|
Colour Comparison Cabinet
EN ISO, ASTM
The standard light cabinets MATCHMASTER 425 III and 425 IV are colour comparison instruments with three light types. There are three standard light types available: D65, A and
TL84. It is possible to switch over automatically or manually between these three standard light sources at arbitrary
time intervals in any desired order. Each cabinet comes with a Test Certificate (light quality).
Both bench models consist ofmetal sheets lacquered
conforming to standards and can be assembled without any tool within some minutes. The colour comparison cabinets are open at the front side. A control panel with illuminated toggle switches - the symbols of the three light sources are shown above - provides an easy operation of the
instrument.
|
|
Colour Comparison Cabinet
EN ISO, ASTM
The standard light cabinets MATCHMASTER 425 III and 425 IV are colour comparison instruments with three light types. There are three standard light types available: D65, A and
TL84. It is possible to switch over automatically or manually between these three standard light sources at arbitrary time intervals in any desired order. Each cabinet comes with a Test Certificate (light quality). Both bench models consist of metal sheets lacquered conforming to standards and can
be assembled without any tool within some minutes. The colour comparison cabinets are open at the front side. A control panel with illuminated toggle switches - the symbols of the three light sources are shown above - provides an easy operation of the instrument.
|
|
Paint Shaker
EN ISO
A world-wide well known machine for grinding, dispersing, mixing– three concepts related to important processes
in the manufacture of paints and lacquers. The RED DEVIL has several decisive advantages: A perfected shaking system with 3-way orbital mixing action achieves optimal dispersing results whilst at the same time ensuring shortest
cycles. The operating method of the RED DEVIL is so convincing that it is prescribed by DIN EN ISO for standardizing the dispersing behaviour of pigments.
|
|
|
